FORT-111 WiFi

Removed from sale

Home » Fleet Management Devices » FORT-111 WiFi

FORT-111 WiFi device is designed for installation on vehicles that operate outside GSM networks (timber trucks, mining trucks, etc.), as well as for airports and other facilities where active use of GSM communication is undesirable.

Features FORT-111 WiFi

Continuous real-time monitoring
Accurate distance calculation without cutting corners
Adjustable data transfer rate to save GPRS traffic
Black Box function: data logging and uploading (up to 150,000 records – more than a month of off-line operation)
GSM voice communication
Collecting data from the vehicle CAN bus
Connections for 8 fuel level sensors
Stable operation in the temperature range from -40 °С to +85 °С (-40F to +185F)
Driver identification by means of IButton key and RFID cards
Connections for 4 digital temperature sensors (1-Wire interface)
2 analog-digital inputs
4 digital inputs with pulse count function
1 input for connection to ignition
RS-485 for connection to fuel level sensors and other equipment
Operation with EGTS protocol
2 discrete outputs to control external devices
Self-diagnostic function
Data transfer to 2 servers
Configuration via SMS, GPRS, USB
Built-in Li-ion battery, 1800 mAh
Input voltage 8-40 V
Withstands short-term voltage spikes up to 600 V
Wi-Fi for communication with the server, configuring and updating firmware
Authentication system for correct Wi-Fi network selection and preventing unwanted traffic from third-party equipment
Data encryption to prevent traffic interception

Technical parameters

GLONASS/GPS module

U-blox NEO-M8
32 Tracking Channels
Cold and warm start time – 35s
Hot start time — 3s
Navigation accuracy – 2.5m

Operation in GSM networks

GSM 900/1800 MHz
Voice communication
SMS messaging
GPRS data transfer

SIM-card holder

Antenna type (GSM GPS/GLONASS)

External

Computer interface

USB 2.0

Internal non-volatile memory

16 MB

«Black box» size

150,000 records

Digital inputs

4 universal inputs with pulse count function
1 input for connection of “ignition”

Analog-digital inputs

1 input with operating range from 0 to 15V
1 input with operating range from 0 to 30V

Digital output

2 universal outputs
1 LED control output

Interfaces

RS-485
1-Wire
CAN

Connection of communication devices

Connection to camera

Stops announcement function

Supply voltage

8 to 40 V

Built-in battery

Lithium-ion
Capacity — 1800 mA h
Service life — at least 800 charge/discharge cycles.

Temperature Range

– 40 to +85°С (-40F to 185F)

Weight

400 g

Dimensions

104 х 122 х 33 mm

Supported data transfer protocols

LLS fuel level sensor protocol and others compatible with it via RS-485 interface
BioSmart-E-T Biometric Fingerprint Reader protocol (fingerprint scanner)
J1939 (FMS) protocol to transfer messages to the CAN bus
Communication with CAN log via RS232/485 converter (MOXA TCC-80 or similar)
Communication with contactless card/key readers with Dallas Touch-memory support via 1-Wire interface
Communication with DS18S20/ DS18B20 digital temperature sensors (up to 4 pieces at a time) via 1-Wire interface